belinda

About Belinda Sandberg

This author has not yet filled in any details.
So far Belinda Sandberg has created 40 blog entries.
1811, 2016

Introduction offer from NEO Monitors; LaserGas™ III SP CO Combustion analyzer

November 18th, 2016|

NEO Monitors is presenting another great campaign, valid from November 15th to June 30th.

The new LaserGas™ III CO Combustion is a new multicomponent analyzer targeting combustion control on boilers, process heaters, fired heaters and others. It is one of the most compact TLAS analyzers that is certified for use in all zones (except ZONE 0) making it […]

1411, 2016

Introducing LaserGas™ III SP CO – a combustion analyzer for rough environments

November 14th, 2016|Tags: , , , , , , , , , , , , , , , , , |

NEO Monitors unveils the industry’s most compact CO combustion analyzer suitable for the most demanding environments. LaserGas™ III CO includes measurement of CH4, H2O and temperature in one single unit designed to reduce risk.

Based on decades of experience and customer feedback, NEO Monitors has designed an Ex-d certified tunable diode laser (TDLS) analyzer. The instrument is […]

1210, 2016

EXTENDED CAMPAIGN – LaserGas™ iQ² with a great discount!

October 12th, 2016|Tags: , , , , , , , |

NEO Monitors extend the campaign period for LaserGas™ iQ². The offer is only valid to December 31st

LaserGas™ iQ² is referred to as a Laser Based Gamechanger and is the first analyzer to Measure Five in One!

A significant breakthrough at NEO Monitors research division, allows global industries to measure four gases and temperature with just one device. This cutting-edge instrument delivers vast benefits […]

909, 2016

EXTENDED CAMPAIGN – Upgrade Your LaserGas™ I to LaserGas™ II

September 9th, 2016|Tags: , , , , |

NEO Monitors extend the campaign period for all customers with a LaserGas™ I. The offer is only valid to December 31st.

By replacing LaserGas™ I to a LaserGas™ II you will benefit from a great discount in addition to;

Renewed 2 years warranty
A more robust and compact design
A more modern service interface
Extended Product Service
Fast and easy installation
Simplified […]

2806, 2016

New article on DeNOx processes

June 28th, 2016|Tags: , , , , , , , , , , , , , , , , , , , |

Norsk Elektro Optikk (NEO) has been part of a research project where the goal was to design a compact analyzer for DeNOx processes based on mid-infrared lasers. Most of the technology already exists in the LaserGas™ Q and the applications can already be solved using this family of analyzers. Below you can read an article […]

205, 2016

NEO Monitors and Ankersmid Sampling at CEM 2016 – International Conference and Exhibition on Emissions Monitoring

May 2nd, 2016|Tags: , , , , , , , , , , , |

NEO Monitors and Ankersmid Sampling are participating  in CEM 2016.

The 12th International Conference and exhibition on Emissions monitoring will take place in Lisbon, Portugal from the 18th – 20th May 2016.

The CEM event brings together the International emissions monitoring community to network, trade ideas and discuss technology, methods, applications, legislation and standardization relevant to […]

2004, 2016

Introduction campaign from NEO Monitors: LaserGas™ iQ² with a great discount!

April 20th, 2016|Tags: , , , , , , , |

NEO Monitors introduces another great offer; LaserGas™ iQ² with a great discount!

LaserGas™ iQ² is referred to as a Laser Based Gamechanger and is the first analyzer to Measure Five in One!

A significant breakthrough at NEO Monitors research division, allows global industries to measure four gases and temperature with just one device. This cutting-edge instrument delivers vast benefits and reduced […]

604, 2016

Next generation laser based solution helps reducing NOx emissions

April 6th, 2016|Tags: , , , , , |

The new LaserGasTM III DeNOx analyzer uses next generation laser technology to measure NH3 used in the process to reduce NOx-emissions from refineries, power plants, and industries such as chemical, petrochemical and steel. The instrument increases safety and helps reduce costs in plant operations.

NEO Monitors introduces a new generation of the safest and most precise […]

604, 2016

Introduction offer from NEO Monitors; Next generation laser based solution helps reducing NOx emissions

April 6th, 2016|Tags: , , , , , , |

NEO Monitors introduces another great offer; Next generation laser based solution helps reducing NOx emissions

The new LaserGasTM III SP NH3 DeNOx analyzer uses next generation laser technology and designed to operate in hazardous areas to increase efficiency of the DeNOx-processes and minimize emissions. It is one of the most compact analyzers that is certified for use in […]

404, 2016

Next generation laser based solution helps reducing NOx emissions

April 4th, 2016|Tags: , , , , , , , , |

The new LaserGasTM III DeNOx analyzer uses next generation laser technology to measure NH3 used in the process to reduce NOx-emissions from refineries, power plants, and industries such as chemical, petrochemical and steel. The instrument increases safety and helps reduce costs in plant operations.

NEO Monitors introduces a new generation of the safest and most precise […]